Operation Manual

Directory
4-5
Operation Setting your
machine
Getting startedDirectoryMaintenanceSafety ContentsInstallation
+ There are three ways detailed in the table below, to choose and add one or more subscribers
to your list. Then confirm your choice by pressing OK.
+ For every subscriber included in the list repeat the above step then validate with OK.
Note: you can stop record creation at any time by pressing .
+ The list ID number will automatically appear on the screen. If you wish to modify this
number you may do so by choosing another free number and validate with OK.
+ Press to confirm your entry.
ADDING OR DELETING A NUMBER
FROM THE LIST
13 OK - DIRECTORY / MODIFY
+ Select the subscriber list (L) by means of the  or  keys and validate your choice
with OK.
From ... Procedure
subscriber’s name
+ With the alphanumeric keypad enter the first
letters of your subscriber’s name and continue
until the whole name is displayed on the screen.
subscriber’s ID number
+ Enter directly the subscriber’s ID number.
subscribers directory
+ Press key then select by means of the 
or  keys.