Operation Manual

Maintenance
6-11
Operation Setting your
machine
Getting startedDirectoryMaintenanceSafety ContentsInstallation
+ Next, clean the main charger grid. Take the grid cleaner out of the toner kit. Take the grid
cleaner out of the protective bag and remove the cap.
Note: The pad of the grid cleaner contains water. Clean the grid quickly so that the pad may not dry off.
+ Lift up slightly on the main charger unit and pull it out a short distance as shown in the
figure below.
+ Attach the grid cleaner to the printer with the pad facing up.
Cap
Grid Cleane
r
Main Charger
Unit
Grid Cleaner