User Manual

44
STEP 8: CLOSE CONTROL PANEL:
 Pull up on the green tipped drop-in pin and slowly swing the front control panel around until it’s
parallel to the cabinet sleeve.
 Grasp the side edges of the control panel collar and slowly guide the control panel into the cabinet
sleeve. Note: Ensure the guide roller lines up in it’s track when closing the control panel.
 When the control panel seems closed, shift your hands to the top (below the signage) and bottom
of the collar assembly. Push the control panel into the cabinet sleeve until it latches securely in place. In
some instances, you may have to “forcibly” push the control panel assembly depending on the installation
and wall structure.
SITE PREPARATION / INSTALLATION
** IMPORTANT **
AFTER CLOSING CONTROL PANEL, CHECK TO
ENSURE
THAT PANEL IS SECURELY LATCHED.
ALSO, REMEMBER TO RE-LOCK THE GREEN
HANDLE
LATCH LOCK.