Installation Manual User Manual

MoDEl Ft7000 EDU assEMbly FiElD installation GUiDE

10. Refer to the following Figures. Ty wrap the UCV4 Ground and EDU Bin Present Switch cables

(together) to a hanger at the output of the E-Chain. Secure the UCV4 Ground cable to the stud

at the front right corner of the EDU Tray (just past where it comes out of the E-Chain) with a #8-

32” nut.

11. Ty wrap the EDU Comms/Power cable (individually) to a hanger at the output of the E-Chain.

Press the EDU Comms/Power cable into the two (2) white cable clips along the right side of the

tray.

6. Refer to the Figures below. Secure the E-Chain (cable bundle track) to the front right corner of

the tray with two (2) #4-40 x 1/4” stainless steel screws.

i/o bay

(lowEr)

EDU

tray

UCv vErtiCal

assEMbly

E-CHain

(CablE traCK)

7. Refer to the Figures below. Press the EDU Comms/Power, UCV4 Ground, and the EDU Bin

Present Switch cables into the E-Chain (cable track).

8. Ty wrap the UCV4 Ground and EDU Bin Present Switch cables (together) to a hanger at the

entrance to the of the E-Chain.

9. Ty wrap the EDU Comms/Power cable (individually) to a hanger at the entrance to the of the

E-Chain.

EDU Comms/

Power Cable

UCV Ground

Cable

EDU Bin Present

Switch Cable

UCv vErtiCal

assEMbly

Cable Ty

Hangers

E-Chain Connection to

the EDU Tray