User Manual User guide

90
moDel rl/Ft5000
XP
USer mAnUAl w/PriSm
tm
nDc emUlAtion
chAnge PASSworD For USer 1
chAnge PASSworD For USer 2
1. From the DiAgnoSticS screen, select the key mAnAgement option by
pressing number <3> on the keypad.
2. Use the keypad to log into the key mAnAgement menU. enter the USer
1 PASSworD and then press the <Enter> key. Enter the USer 2 PASS-
worD and then press the <Enter> key.
3. From the key mAnAgement menU screen, select the chAnge PASSworD
For USer1 option by pressing number <3> on the keypad.
4. From the key mAnAgement menU screen, select the chAnge PASSworD
For USer2 option by pressing number <4> on the keypad.
DeScriPtion:
The chAnge PASSworD For USer1 and USer2 options are only available if
the keypad (SPED) is a VEPP (VISA® compliant Encrypting PIN Pad) or
PCI-EPP.
For the VEPP or PCI-EPP, dual control passwords are required when entering
Key Management.
A prompt will be displayed requiring dual password inputs whenever the
key mAnAgement menU item is selected.
When this dialog is displayed, menu item 1 is automatically selected. When
the password for User 1 is entered successfully, menu item 2 will automati-
cally be selected. If the password for User 2 is entered successfully, the key
mAnAgement menU is displayed.
When initially installed, The VEPP or PCI-EPP contains the default pass-
word ‘000000’ (six zero’s). This password MUST be changed by the users
after it is entered the rst time.