User Manual User guide

82
moDel rl/Ft5000
XP
USer mAnUAl w/PriSm
tm
nDc emUlAtion
teSt keyPAD
AcceSS inStrUctionS:
1. From the DiAgnoSticS Screen, select the keyPAD option by pressing
number <2> on the keypad.
2. From the keyPAD screen, select the teSt keyPAD option by pressing
number <2> on the keypad.
The teSt keyPAD function enables you to verify proper operation of the nu-
meric, function, and control buttons of the terminal. Press any button (except
the <Cancel> button) and the report dialog will indicate (echo) the state of
the button (e.g. Keypad (1) pressed). When done testing all the keys, press
<Cancel> to exit and return to the Keypad menu.
*note*
Buttons pressed at the EPP keypad will be referred to as
a “Keypad” button. If one of the 8 screen function keys
on the front side of the control panel is pressed, it will be
referred to as a “Screen button”.