User Manual User guide

triton DiAgnoSticS

The default factory user ID is 00 and the default password is 1234.

AcceSS inStrUctionS:

1. From the Supervisor “Select” menu, select “DiAgnoSticS” by pressing

the number <7> on the keyboard, followed by the <Enter> key.

2. From the Supervisor “DiAgnoSticS” menu , select “VenDor DiAgnoS-

ticS” by pressing the number <12> on the keyboard, followed by the

<Enter> key. This will launch the Triton Diagnostics application (Run-

ning Triton Diagnostics) via an embedded XFS Vendor Dependent Mode

(VDM) service provider. After the Prism Services have successfully ini-

tialized, the Security Login (Management Functions) should appear on

the display.

(TRITON) VENDOR DIAGNOSTICS