User Manual User guide
56
moDel rl/Ft5000
XP
USer mAnUAl w/PriSm
tm
nDc emUlAtion
KEY ENTRY: A sub-menu containing Key Management functions:
3.4.1 Key Entry Sub-Menu Options
CHANGE KEY MODE: A sub-menu containing Change Key Entry Mode
options that is used for non-Visa (AE version) EPP’s:
Pressing <cAncel> will display the main (top-level) Select menu again.
Pressing 25 on the main (top-level) Access menu will display the Key Entry
Sub-Menu. It is only used for a non-Visa (AE version) EPP’s!
ENTER KEY A: Prompts for the “NDC ‘A’ KEY” (master) key.
ENTER KEY B: Prompts for the “NDC ‘B’ KEY” (COMM and MAC key
backup) key.
ENTER KEY V: Prompts for the VISA starter key.
Any attempt to ENTER KEYS with a VISA/PCI EPP will switch the
display back to the main (top-level) Access menu again, with an error
message that keys must be entered from VDM (Select => DiAgnoSticS
=> VenDor DiAgnoSticS => DiAgnoSticS => key mAnAgement).
Any attempt to change the KEY ENTRY MODE with a VISA/PCI EPP
will switch the display back to the main (top-level) Access menu again,
with an error message that it cannot be changed with a VISA SPED.
Pressing <cAncel> will display the main (top-level) Access menu again.