User Manual User guide

54
moDel rl/Ft5000
XP
USer mAnUAl w/PriSm
tm
nDc emUlAtion
DISP ACCESS: Displays all the Access option settings and Key Verication
Values.
PRNT ACCESS: Prints all the Access option settings and Key Verication
Values.
SET PASSWORD: Prompts for a (new) password to protect access to the
Replenish and Access menus.
INIT ENTRY: Prompts for a choice of initial menu when entering supervisor,
‘0’ = Select Menu, ‘1’ = Replenish Menu.
INIT DISPLY: Prompt for a choice of initial interface when entering
supervisor, ‘0’ = Rear Operator Panel,
‘1’ = Front Customer Screen.
EXIT MODE: Prompts for a choice of supervisor exit mode, ‘0’ = exit only
from Select Menu, ‘1’ = immediate exit from any menu.
ENTER V: Prompts for the VISA starter key in non-Visa (aE VErsion) EPP’s.
WRITE V: Stores the VISA starter key in non-Visa (aE VErsion) EPP’s.
3.4 Access Menu
***IMPORTANT***
menU oPtionS 6-25 on thiS Screen Are only APPlicABle For non-
ViSA (Ae VerSion) ePP’S. key entry DAtA For ViSA/Pci ePP’S
mUSt Be entereD From the (triton) DiAgnoSticS key mAnAgement
oPtion menU (Select => DiAgnoSticS => VenDor DiAgnoSticS =>
DiAgnoSticS => key mAnAgement).