User Manual User guide

53
PriSm
tm
nDc emUlAtion SUPerViSor FUnctionS
Pressing 37 on the (MORE) Congure functions (sub-menu options) will
display the TCP/IP Cong menu
3.3.2 TCP/IP Cong Menu
RMT ADDRESS: Prompts for the TCP/IP address of the NDC host system
RMT PORT NO: Prompts for the TCP/IP port number of the NDC host
system
LCL PORT NO: Prompts for the TCP/IP port number of the ATM
CONFIG AS SRV: Changes the TCP/IP server to/from ATM: ‘0’ = Host is
server, ‘1’ = ATM is server
SET ADDR/PORT NUMBER: Prompts for a number to complete the NDC
host address and port number template where the NDC host system address
and port are represented as text. The template can be congured using the
NDC Congurator.
PING ADDR NUMBER: Prompts for a number which, when combined with
the NDC host address and port template (as above), will be used to ping the
resulting IP address to test for IP connectivity.
PING IP ADDRESS: Prompts for a traditional IP address in order to ping
that address to test for IP connectivity.
Pressing <cAncel> on the (MORE) Congure functions (sub-menu options)
will display the main (top-level) Congure menu again.