User Manual User guide

48
moDel rl/Ft5000
XP
USer mAnUAl w/PriSm
tm
nDc emUlAtion
Pressing 99 will display additional Replenish functions on the following menu:
INIT EJ: Makes a backup of the Electronic Journal le on the hard disk,
copies the le to the “default drive” and then clears the Electronic Journal
le. Use the NDC Congurator Tool to set up the “default drive”. The oppy
drive will be used as default.
FILL ENV: Will test the envelope supply by dispensing an envelope and
then retracting it if not taken.
FILL CAMERA: Resets the camera device – currently not supported.
INIT DEPOS: Resets the Envelope Depository device.
CLR BINS: Resets the Cheque Processing Module depository pocket and
bin counters.
CHECK CDM: Clears the device status for each of the coin dispensers.
DUMP IMAGES: Copies the stored cheque images to the “default media”.
RCOPY EJ: Copies the backup copy of then electronic Journal le to the
“default drive”. See INIT EJ for conguration of “default drive”.
CLR BNA: Clears all the Cash Deposit counters.
INIT BNA: Resets the Cash Deposit device moving any media found in the
transport or presenter to one of the deposit cassettes.
Pressing <cAncel> will display the main (top-level) Select menu again.
Pressing <99> on the (MORE) Replenish sub-menu page will display the main
(top-level) Replenish menu again.
3.2.1 (MORE) Replenish functions (sub-menu options)