User Manual User guide

PriSm

nDc emUlAtion SUPerViSor FUnctionS

INIT RECPT: Resets the receipt printer and ejects a blank receipt. If an

initialization le is specied in the NDC conguration (see NDC Congurator,

Printer section), the le contents will be sent to the printer before the eject.

TEST CASH: Tests the dispenser shutter and then picks one note from each

physical cassette and puts it in the reject bin. If the Cash Dispenser Service

Provider does not support the physical dispense, one note from each logical

cassette (or denomination) will be picked and put into the reject bin. Correctly

functioning cassettes will be listed when the function completes.

STD CASH: This function is a combination of the “CLEAR CASH”,

“ADD CASH” and “TEST CASH” functions. The amount of notes added

to each cassette type by the “ADD CASH” component is congured with the

“CONFIGURE – SET CASH” function.

INIT CHQ: Resets the Cheque Printer and prints a test cheque.

Pressing <cAncel> will display the main (top-level) Select menu again.

Pressing <99> will display (

MORE) Congure functions (sub-menu options)