User Manual User guide
43
PriSm
tm
nDc emUlAtion SUPerViSor FUnctionS
1. introDUction
1.1 Document Scope
This document provides primary descriptions for the Prism
TM
NDC Emulation
application (Version 1.0). It includes both the KAL NDC Supervisor Functions
and Triton Prism
TM
Diagnostics. Prism
TM
NDC emulated software is an option
for Triton models RL5000
XP
, FT5000
XP
, and the FT7000).
1.2 Background
The Prism
TM
NDC Supervisor handles the ATM operator interface and displays
state of health information when the machine is in and out of service. It also
provides the operator with all of the standard NDC Supervisor Functions.
2. cUStomer moDe
On ATMs with rear operator panels, the following is displayed when the ATM
is in cUStomer moDe. That is when the supervisor mode/switch is not active.
MODE: Values can be IN SERVICE, CUSTOMER, OUT OF SERVICE,
SUSPENDED.
HOST STATUS: Values can be ONLINE or OFFLINE
The remainder of the screen will contain any applicable error messages.