User Manual User guide

36
Model rl/Ft5000
XP
USer ManUal w/PriSM
tM
ndc eMUlation
3. Before inserting the new ink
cartridge, turn the cartridge knob
“counterclockwise” until ribbon
istaut(seegureatright).
4. Open the Bail. Carefully mount
the ink cartridge onto the drive
shaft, keeping the ribbon between
the Platen and the Print Head
(seethegurebelow).
Turn knob counterclockwise.
Knob
Ribbon
Bail
(Open position)
Ink cartridge
Guide slot
Platen
Printhead
Cartridge knob
5. Thread the ribbon through the Guide slot and, before closing the Bail, make
sure the ribbon is still taut by turning the cartridge knob counterclockwise
(seethegurebelow).
6. Close the Bail. The ink cartridge is now loaded.
Ink cartridge installed.