User Manual User guide

33
Preventative Maintenance
rePleniShing PaPer
(JoUrnal Printer)
NOTE: Thefollowingstepsreferencethegurebelow.
1. Access the journal printer and turn the power switch OFF.
2. Lift the Bail (item 3) and remove any paper that may be inside the printer.
Close the Bail.
3. Place the paper roll (item 4) in the Paper Handler (item 5). The paper roll
must have a roll pin through its center.
Power switch
Cut / Feed
switch
Bail slot
Bail
Paper “out’
sensor
Journal printer.
*** Warning ***
Remove power from the Journal Printer during any servicing
that requires the user to insert ngers into the printer wheel area.