User Manual User guide

28
Model rl/Ft5000
XP
USer ManUal w/PriSM
tM
ndc eMUlation
introdUction
This section of the manual covers
preventive and corrective mainte-
nance procedures appropriate for
user personnel. The following areas
are covered:
1. rePleniShing PaPer rl/Ft
XP
(receiPt Printer). Describes
how to replace a spent receipt
paper roll.
2. rePleniShing PaPer (JoUrnal
Print e r ). Describes how to
replace the spent journal paper
roll.
3. l o a d i n g i n k c a r t r i d g e
(JoUrnal Printer). Describes
how to load the printer ink
cartridge.
4. cleaning the encloSUre. The
proper way to clean the ATM
housing and displays..
5. card reader cleaning. The
recommended card reader
cleaning technique.
*IMPORTANT*
Only qualied service person-
nel are authorized to repair or
service the terminal. Should a
malfunction occur, DO NOT
attempt to service the unit your-
self! Contact your Triton certi-
ed service provider!
***WARNING***
The control panel for the RL
XP
is provided with a pneumatic
piston to prevent the door from
extending too far when opening
and provides some dampening
when being closed. Do not force
the piston when closing the con-
trol panel!
rePleniShing receiPt PaPer
(rl5000
XP
)
1. Open the top of the ATM by
unlocking the control panel and
pulling the hinged door forward.
NOTE: This operation must be com-
pleted with the AC power applied to
the ATM.
2. If paper remains on the roll, cut
the paper between the roll and the
input to the printer with a pair of
scissors.
*IMPORTANT*
Standard thermal and Black
Mark thermal paper have differ-
ent specications. If necessary,
contact your Triton certified
service provider for ordering
information!