User Manual User guide
26
Model Rl/Ft5000
Xp
USeR ManUal w/pRiSM
tM
ndc eMUlation
veRiFY opeRation
1. Close and lock the security cabinet.
2. Verify the cassettes are <Locked> in the dispenser. Enter Vendor
(Triton) Diagnostics from Prism
TM
NDC Supervisor Functions. Select
> diagnoSticS (option 7) > vendoR diagnoSticS (option 12).
3. From the (Triton) Diagnostic Menu, select caSh diSpenSeR (option 1).
4. Refer to the gure below. Select teSt diSpenSe (Option 3). Enter # of
notes to be dispensed (1-5) from the individual cassettes that are installed
(“A”, “B”, “C”,or “D”). Select peRFoRM teSt (option 5). The Test
Dispense operation will start.
5. The Test Dispense command instructs the dispenser to dispense, minimum,
one note from each installed and operational cassette into the reject
cassette. This test exercises the dispenser without sending notes to the
exit.
6. After completion of the Test Dispense, the following prompt is displayed
(see gure below).
Enter # of notes.
Test dispense prompt.