User Manual User guide
20
Model Rl/Ft5000
Xp
USeR ManUal w/pRiSM
tM
ndc eMUlation
**CAUTION**
The “throat” assembly on the
mechanism is not a load bearing
structure! Do not grasp or apply
any pressure to the throat.
3. Continue to support the bottom
of the cassette to keep it level as
you place it on a table or other
at surface. If the cassette has a
loading arm, fold it down, which
will raise the rear of the cassette
and allow gravity to help keep the
notes neatly stacked during the
loading process (refer to gure
at right).
Cassette w/loading arm down.
2. To remove the selected note cassette, grasp the cassette handle with one
hand while holding the mechanism in place with the other hand (See
gures below). Pull the cassette out slightly. Place one hand underneath
to support the cassette as you slide it completely out of the unit.
RepleniShing caSSetteS
Perform cash replenishments from Prism
TM
NDC Supervisor Functions. Select
(Main MenU) > RepleniShMent (option 4) > add caSh (option 8). Refer
to the Prism
TM
NDC Application > Prism
TM
NDC Supervisor Functions
section of this manual for additional information.
ReMoving note caSSetteS
1. Open the electronic lock on the security container door and open the door
to gain access to the dispensing mechanism.
Cassette removal (Model RL5000
XP
shown).
Cassette removal.