User Manual User guide
14
Model rl/Ft5000
Xp
USer ManUal w/priSM
tM
ndc eMUlation
MenU-BaSed operation
The terminal operates as a menu driven system. Host controlled messages and
menu options presented on the LCD display screen guide the user’s actions.
The desired menu option is selected by pressing one of the screen function keys
located to the left and right of the display. For the purpose of security, many
screens may time out as determined by the Host. The time out length may vary
depending on the function being performed.
Shortly after the unit is turned on, the Windows
XP
operating system,
and then
Prism
TM
NDC will load, followed by the Customer Welcome screen. If the con-
trol panel is opened ANYTIME (before or after) the Prism
TM
NDC Emulation
application loads, or the supervisor switch is in the “SUperviSor” position, the
terminal will default to the the Prism
TM
NDC Supervisor main menu (Select).
*** IMPORTANT ****
The supervisor switch must be in the “rUn” position
AND the control panel must be “cloSed” before the
terminal will go into the “cUStoMer” mode.