User Manual User guide
triton DiAgnoSticS
99
remoVe USer
AcceSS inStrUctionS:
1. From the DiAgnoSticS screen, select the PASSworD mAintenAnce option
by pressing number <4> on the keypad.
2. From the PASSworD mAintenAnce, select the remoVe USer option by
pressing number <5> on the keypad.
DeScriPtion:
The remoVe USer function allows removing an existing user from the sys-
tem. To remove an existing user:
1. Select <1> on the keypad. Toggle through the 2-digit ID codes for the
user you want to remove from the system.
2. Select <2> on the keypad. You will be prompted to conrm the remove
operation.
*note*
This function is only available to personnel with
Master password access to Vendor Diagnostics.