User Manual Instruction Manual

107

MANAGEMENT FUNCTIONS

GENERAL PARAMETERS

ACCESS INSTRUCTIONS:

1. From the M

AIN MENU screen, select the TERMINAL CONFIGURATION option

by pressing number <6> on the keypad.

2. From the TERMINAL CONFIGURATION screen, select the GENERAL PARAM-

ETERS option by pressing number <1> on the keypad.

ESCRIPTION:

The GENERAL PARAMETERS option allows the terminal operator to perform the

following functions:

1. TERMINAL NUMBER. This function enables you to edit the terminal number.

It is a unique string of sixteen (16) numbers (usually provided by the host

network or bank). The terminal ID will be sent to the host when specified.

Press <1> on the keypad to enter/edit the ID number. Note: Alpha

characters must be added with a keyboard (external USB keyboard for

an RL

2. S

END CABINET A LARM STATUS (Default: Disabled). This function allows

you to enable/disable the send cabinet alarm status. Press <2> on the

keypad to either enable (check) or disable (uncheck). When enabled,

menu option (3) - ‘Send Cabinet Alarm Status Code’ will automatically

be enabled.

3. SELECT CABINET ALARM STATUS CODE (Default: Grayed out). When

enabled, allows user to select status code ‘204’ or ‘208’ that is sent to the

host network or bank. Press <3> on the keypad to choose status code.

4. SEND SAFE DOOR ALARM STATUS. This function allows you to enable/

disable the send safe door alarm status. Press <4> on the keypad to either

enable (check) or disable (uncheck).