User Manual User guide

MODEL FT5000 (X2) USER MANUAL

VERIFY OPERATION

1. Close and lock the security cabinet.

2. Verify the cassettes are Locked and In Service.

3. In Management Functions, select DIAGNOSTICS > DISPENSER.

4. Select the TEST DISPENSE option. Select either individual cassettes that are installed (“A”, “B”, “C”, or

“D”) or “All Cassettes ”. A prompt appears asking how many notes to dispense. The Test Dispense

operation will start.

5. The Test Dispense command instructs the dispenser to dispense, minimum, one note from each

installed and operational cassette into the reject vault. This test exercises the dispenser without

sending notes to the exit.

6. After completion of the Test Dispense, the following prompt is displayed. “Test Dispense Completed

Successfully - Dispense Count , A: (# of notes), B: #, etc.

Enter # of notes.

**IMPORTANT**

Ensure the MULTIPLE AMOUNT parameter matches the

denomination of currency in each Note Cassette!