User Manual User guide

CASSETTE CLOSE / CASH REPLENISHMENT

INSTALLING THE REJECT CASSETTE

2. The reject vault is now open for collecting any rejected bundle notes. These will be present in the

folding tray. After retrieving any rejected bundle notes, lift the folding tray and check underneath for

any rejected single notes.

3. After removing any rejected notes, close the vault lid. Fold the lid down to its locked position. The

release button should “pop” out, allowing the lid to mate cleanly with the body of the cassette. Turn

the key “counterclockwise” to lock the vault.

Bundle reject tray.

Single reject compartment.

Using the reverse of the steps taken to remove the reject cassette, slide the cassette back into its slot in the

mechanism. Make sure the cassette is fully inserted. Ensure the cassettes are LOCKED and IN SERVICE using

the Cassette Close procedures.