Quick Reference Guide

7
PUSH PACKER PLATE TO-
WARDS THE CASSETTE
HANDLE
. PLATE SHOULD
STAY
IN PLACE.
3
1
2
6
PLACE CASSETTE ON A LEVEL SURFACE. INSERT CAS-
SETTE KEY INTO THE CASSETTE LOCK AND TURN “CLOCK-
WISE”. PRESS “GREEN” RELEASE BUTTON TO RAISE LID.
5
UNLOCK/OPEN DISPENSER SECURITY DOOR. GRASP CAS-
SETTE HANDLE WITH ONE HAND WHILE HOLDING MECHA-
NISM WITH THE OTHER. PULL CASSETTE OUT SLIGHTLY,
THEN PLACE ONE HAND UNDERNEATH. REMOVE CAS-
SETTE.
STEP
ACTION
4
7
COUNT THE NUMBER OF BILLS THAT REMAIN IN THE CAS-
SETTE, IF ANY.
COUNT THE NUMBER OF BILLS THAT ARE BEING ADDED
TO
THE REMAINING NOTES.
THE TOTAL OF THESE AMOUNTS WILL BE ENTERED IN
THE
“ENTER CASSETTE QUANTITY” PROMPT FOR CAS-
SETTE CLOSE PROCEDURE.
REPLENISH NMD-100 CASSETTE(S)
8
STEP
ACTION
PLACE CURRENCY IN THE
CASSETTE
AND LEVEL NOTE
PILE
. MOVE PACKER PLATE
WITH
ENOUGH PRESSURE TO
HOLD
THE NOTES.
EXTEND THE “PAWLS” ON PACKER PLATE FULLY. CLOSE
LID
AND INSTALL IN DISPENSER.
CLOSE CASSETTE LID TO ITS
LOCKED
POSITION. THE
GREEN RELEASE BUTTON
SHOULD
“POP” OUT. TURN
KEY
“COUNTERCLOCKWISE”
TO LOCK CASSETTE. SLIDE
CASSETTE
INTO ITS SLOT IN
THE
MECHANISM.
REMOVE THE REJECT CASSETTE. PLACE ON LEVEL SUR-
FACE. INSERT KEY INTO LOCK AND TURN “CLOCKWISE”.
PRESS GREEN RELEASE BUTTON TO RAISE LID.
9
REMOVE ANY REJECTED NOTES - BOTH SINGLE AND
BUNDLED
AREAS. FOLLOW LOCKING PROCEDURES FROM
STEP 7 AND SLIDE CASSETTE BACK INTO MECHANISM.