Quick Reference Guide

4
CASSETTE CLOSE FUNCTIONS (FRONT DISPLAY)
FOLLOW ACCESS INSTRUCTIONS TO ENTER MANAGEMENT FUNCTIONS. SELECT TERMINAL CLOSE FUNCTIONS.
SELECT CASSETTE CLOSE.
N
OTE: FOR AN NMD-50/100 DISPENSER INSTALLED, WAIT FOR
THE
CASSETTES TO UNLOCK (THIS IS DONE AUTOMATICALLY).
 REMOVE AND REPLENISH THE SELECTED CASSETTE(S).
PROCEDURES FOR THE NMD-100 CASSETTE REPLENISH-
MENT ARE ON PAGE 7.
 PLACE SELECTED CASSETTE(S) IN SERVICE. PRESS <EN-
TER>. NOTE: THE NMD-50/100 CASSETTES MUST BE LOCKED
AND
IN SERVICE FOR NORMAL OPERATION.
N
OTE: FOR AN NMD-50/100 INSTALLED, WAIT FOR THE CAS-
SETTES TO LOCK (THIS IS DONE AUTOMATICALLY). PRESS <EN-
TER> IF APPLICABLE.
 ENTER CASSETTE QUANTITY (NUMBER OF NOTES, NOT
VALUE) FOR THE SELECTED CASSETTE(S). PRESS <ENTER> TO AC-
CEPT ENTRY. REPEAT FOR EACH SELECTED CASSETTE.
 A CLOSE REPORT IS DISPLAYED TO BE PRINTED OR SAVED.
T
HIS OPERATION WILL RESET THE NUMBER OF BILLS IN THE
CASSETTE
(S) TO ZERO (0). PRESS <ENTER>.
 AFTER CASSETTE(S) HAVE BEEN REINSERTED IN THE DISPENSER,
PRESS <ENTER>.
 A TRIAL CASSETTE CLOSE REPORT AUTOMATICALLY
IS
DISPLAYED TO BE PRINTED OR SAVED. PRINT AND RETAIN A
COPY
FOR STARTING POINT REFERENCE. PRESS <ENTER> TO RE-
TURN TO CLOSE FUNCTIONS.