Manual

The DTM model is a grid of square cells. A unique depth value is assigned
to each cell. This value is computed from all the beams falling in that cell
according to the user’s choices: average, max, min, last, first, or from the
most vertical beam. The geographical position of a cell is the center of the
cell.
What BathyPro Needs from You
You must have the following to use BathyPro:
• a monitor driven by a video card capable of displaying 16 million colors
• an Intel Pentium® CPU running Windows NT, Windows 2000 or Windows
XP
• 32 megabytes of RAM
• at least 10 megabytes of free disk space
• an appropriately configured software dongle from Triton Elics International
Installing the BathyPro Software
Bathy Pro comes to you on a CD-ROM. You use the setup utility from the
CD-ROM to install the program. (Do not merely copy the CD-ROM’s contents to
your hard disk.)
To install BathyPro
1. Put the CD-ROM into your computer’s CD-ROM drive.
2. Browse for the installation or setup program on the CD-ROM that runs the
installer; click on the installation program name or press [Enter].
The setup/installation utility runs.
3. Follow the instructions in the install program.
The setup/installation utility will inform you when installation is complete.
June 2004 BathyPro User’s Manual 18