User Manual Owner manual

51
ARGO USER MANUAL
4. On the Key Management screen, press 1 (Enter
Master Keys).
5. Enter User 1 password, and press ENTER.
6. Enter User 2 password, and press ENTER.
7. Press 2 (Enter PIN Master Key). (For MAC
key entry, press 1.)
8. Press ENTER to select the default setting of
New Key.
9. Enter PIN Master Key part A using the function
keys and keypad schema shown on screen.
10. Press F7 (Enter) when all of the Master Key
part is entered.
11. Verify the check digits match those provided by
the Host Processor for this part of the Master
Key. If a match, press ENTER.
NOTE: If check digits do not match,
press CANCEL
to return and carefully
re-enter the part.