User Manual Owner manual

ARGO USER MANUAL

10. Rotate the printer towards the front of the unit.

11. Check the blue lever to ensure it’s in the correct

position as shown. If it is not in the position shown,

move the lever to the correct position. (Lever moves

to three positions.) Close the printer assembly and

perform step 8 again. Ensure the printer is secured

by the release pin.

12. Close and lock the control panel. Go to M

ANAGEMENT FUNCTIONS: MAIN MENU > DIAGNOSTICS > PRINTER

and perform a RESET/TEST PRINTER.

Blue tension lever (correct position).

Rotate printer open.

Select Printer on Diagnostics Menu. Select Reset/Test Printer on Printer

Diagnostics Menu.

The Reset/Test Printer function re-initializes and then

performs an operational test of the printer. A pattern

of characters is printed on the receipt.