User Manual Owner manual

8
ARGO USER MANUAL
This section describes the basic operation of the terminal. The following topics are covered:
1. C
ONTROL PANEL LAYOUT. Describes the layout of the terminal’s control panel.
2. KEYPAD OPERATION. Describes the use of the alphanumeric keypads.
3. MENU-BASED OPERATION. Gives a general overview of the terminal display interface.
4. CUSTOMER TRANSACTIONS. Summarizes the actions involved in typical customer transactions. In addition,
the voice-enabled transactions feature is described.
The user interface of the terminal consists of the LCD screen, receipt chute, card reader, speaker, headphone
jack (visually impaired), and 24 keys on three keypads. The Function keys are arranged in two four-key
groups, one group on either side of the LCD display. The Function keys on the 7” touch screen display are on
the screen. The main keypad consists of 10 alphanumeric keys, two arrow keys and four large control keys,
all located in a 16-key group beneath the LCD screen.
The main keypad and control keys have an integral raised Braille symbol to conform to the requirements of
the Americans with Disabilities Act
The 12.1 inch screen has touch-reactive F keys on the sides and most closely resembles previous ATM
functionality. The F keys will respond even when the user wears gloves.
The 7 inch screens are fully touch-reactive and have no external F Keys. The 7 inch screen is capacitive
sensing and therefore requires human touch (no gloves) to operate. The introduction of E-receipt technology
is available on this model.
INTRODUCTION
CONTROL PANEL LAYOUT
12.1 inches with touch-reactive F keys 7 inch totally touch-reactive screen