User guide

TRITON SYSTEMS, INC.

SECTION 5 - MANAGEMENT FUNCTIONSOPERATION MANUAL - MODEL 97XX-Series

5-140

9700-SERIES

9705-SERIES

9710-SERIES

9750-SERIES

COMMUNICATION HEADER

FACTORY DEFAULT: PROCESSOR-SPECIFIC

ACCESS INSTRUCTIONS:

1. Select TERMINAL CONFIGURATION from the MANAGEMENT

FUNCTIONS menu.

2. Select SET TERMINAL PARAMETERS.

3. Select MORE.

4. Select COMMUNICATION HEADER.

DESCRIPTION:

The COMMUNICATION HEADER is an optional feature that is only

applicable to certain processors. When a specified processor re-

quires the use of the COMMUNICATIONS HEADER it must be

ENABLED and have the correct data in the header data field. The

COMMUNICATION HEADER data field consists of alphanumeric

characters.

To enter a digit 0-9, press the key that has that digit. To enter a

letter, first press the <CTRL> key, then press the key that has the

letter you want on it. The first press of the key will display the first

character above the number. Subsequent presses will display the

characters in sequence. When the character you want is displayed,

press the <RIGHT ARROW> key to ‘lock in’ the character. If your

next character is a letter, you must press the <CTRL> key again.

RROR CONDITIONS:

Enabling the COMMUNICATION HEADER when using a proces-

sor that doesn’t use this feature will prevent any type of transac-

tion from completing. Disabling or having incorrect data in the COM-

MUNICATION HEADER data field (if the feature is required) will

also prevent any type of transaction from processing.