User guide

TRITON SYSTEMS, INC.

SECTION 5 - MANAGEMENT FUNCTIONSOPERATION MANUAL - MODEL 97XX-Series

5-128

9700-SERIES

9705-SERIES

9710-SERIES

9750-SERIES

BACKUP NUMBER

FACTORY DEFAULT: NONE

ACCESS INSTRUCTIONS:

1. Select TERMINAL CONFIGURATION from the MANAGEMENT

FUNCTIONS menu.

2. Select SET TERMINAL PARAMETERS.

3. Select MORE.

4. Select TRITON CONNECT.

5. Choose BACKUP NUMBER.

ESCRIPTION:

The BACKUP NUMBER function is used to enter a backup num-

ber that the terminal can use for calling back the Triton Connect

computer.

When this function is selected, the current phone number is dis-

played (if nothing appears on the screen, no number is set). Se-

lect CHANGE to blank the current entry, and then enter the de-

sired phone number. The phone number may be up to 15 digits

long. It can also contain a dialing prefix, such as a ‘9’ for an out-

side line, if necessary. If you need to pause after the prefix, place

a comma in the number for a two-second delay at that point. Press

the <CTRL> key, then the <0> key, followed by the <RIGHT AR-

ROW> key to select the comma character. Make sure to enter the

long distance prefix ‘1’ if you are dialing an 800 number or a toll

long distance number. Do not enter dashes in the number.

ERROR CONDITIONS:

There are no error conditions directly associated with this function.