User guide

TRITON SYSTEMS, INC. 5-127

OPERATION MANUAL - MODEL 97XX-Series SECTION 5 - MANAGEMENT FUNCTIONS

9700-SERIES

9705-SERIES

9710-SERIES

9750-SERIES

PRIMARY NUMBER

FACTORY DEFAULT: NONE

ACCESS INSTRUCTIONS:

1. Select TERMINAL CONFIGURATION from the MANAGEMENT

FUNCTIONS menu.

2. Select SET TERMINAL PARAMETERS.

3. Select MORE.

4. Select TRITON CONNECT.

5. Choose PRIMARY NUMBER.

ESCRIPTION:

The PRIMARY NUMBER function is used to enter the number that

the terminal can use for calling back the Triton Connect Host Com-

puter.

When this function is selected, the current phone number is dis-

played (if nothing appears on the screen, no number is set). Se-

lect CHANGE to blank the current entry, and then enter the de-

sired phone number. The phone number may be up to 15 digits

long. It can also contain a dialing prefix, such as a ‘9’ for an out-

side line, if necessary. If you need to pause after the prefix, place

a comma in the number for a two-second delay at that point. Press-

ing the <CTRL> key first, then the <0> key, followed by the <RIGHT

ARROW> key to select the comma character. Make sure to enter

the long distance prefix ‘1’ if you are dialing an 800 number or a toll

long distance number. Do not enter dashes in the number.

ERROR CONDITIONS::

There are no error conditions directly associated with this function.