User guide

TRITON SYSTEMS, INC.
SECTION 5 - MANAGEMENT FUNCTIONSOPERATION MANUAL - MODEL 97XX-Series
5-120
9700-SERIES
9705-SERIES
9710-SERIES
9750-SERIES
BAUD RATE
FACTORY DEFAULT: ‘1200’
ACCESS INSTRUCTIONS:
1. Select TERMINAL CONFIGURATION from the MANAGEMENT
FUNCTIONS menu.
2. Select SET TERMINAL PARAMETERS.
3. Select TELEPHONE.
4. Select the MODEM SETUP option.
5. Select BAUD RATE.
D
ESCRIPTION:
The bit rate of the modem can be controlled with this function. The
rate can be set to 2400 or 1200 bits per second (bps). The default
rate depends on your processor. Do not select 2400 if your pro-
cessor does not support it.
ERROR CONDITIONS:
If the speed of the modem is set to 2400 bps, it may not connect to
a 1200 bps system. The baud rate of the modem should always
be set to the value indicated by your processor.