User guide

TRITON SYSTEMS, INC.

SECTION 5 - MANAGEMENT FUNCTIONSOPERATION MANUAL - MODEL 97XX-Series

5-114

9700-SERIES

9705-SERIES

9710-SERIES

9750-SERIES

DATAPAK ACCESS CODE

FACTORY DEFAULT: N/A

ACCESS INSTRUCTIONS:

1. Select TERMINAL CONFIGURATION from the MANAGEMENT

FUNCTIONS menu.

2. Select SET TERMINAL PARAMETERS.

3. Select TELEPHONE.

4. Select DATAPAK ACCESS CODE.

DESCRIPTION:

NOTE: This feature is only available for Canadian-region ATMs.

This function allows you to enter the DATAPAK ACCESS CODE,

and to turn the DataPak feature On or OFF. The DATAPAK AC-

CESS CODE is provided by the DataPak processing organization,

and is an identification number which enables the DataPak pro-

cessing organization to correctly identify and route data traffic be-

tween the terminal and the transaction processor.

The current state of the DATAPAK ACCESS CODE feature is shown

as either ON or OFF in the label on the left-hand side of the dis-

play. Press the button next to this label to toggle the state of the

feature between ON and OFF.

IMPORTANT: When using the DATAPAK communications proto-

col, ensure the terminal’s Primary and Backup Telephone Num-

bers are configured to dial the DataPak processing organization

(NOT the transaction processor!).

RROR CONDITIONS:

If a DATAPAK-based communications network is being used, the

DATAPAK ACCESS CODE feature must turned ON and the code

must be entered correctly to enable message traffic between the

ATM and the processor to take place.