User guide

TRITON SYSTEMS, INC.
SECTION 5 - MANAGEMENT FUNCTIONSOPERATION MANUAL - MODEL 97XX-Series
5-92
9700-SERIES
9705-SERIES
9710-SERIES
9750-SERIES
SERVICE
FACTORY DEFAULT: IN SERVICE
ACCESS INSTRUCTIONS:
1. Select TERMINAL CONFIGURATION from the MANAGEMENT
FUNCTIONS menu.
2. Select SET TERMINAL PARAMETERS.
3. Select CASSETTE SETUP.
4. Choose the CASSETTE PARAMETERS option.
5. Choose a cassette (A, B, C, or D).
6. Select the SERVICE option.
D
ESCRIPTION:
This function allows the user to set the desired cassette to either
IN SERVICE or OUT OF SERVICE. Placing a cassette IN SER-
VICE will allow the dispenser to access the item inside the cas-
sette. Placing a cassette OUT OF SERVICE effectively turns the
cassette off and does not allow any access to the items in the
cassette.
ERROR CONDITIONS:
When a cassette is removed from the Dispenser while AC power is
on, the status of that cassette will automatically revert to OUT OF
SERVICE. If that cassette is to be used for future transactions it
must be put IN SERVICE before it is recognized in the Dispenser.