User guide

TRITON SYSTEMS, INC.
SECTION 5 - MANAGEMENT FUNCTIONSOPERATION MANUAL - MODEL 97XX-Series
5-90
9700-SERIES
9705-SERIES
9710-SERIES
9750-SERIES
VALUE
FACTORY DEFAULT: ‘$0.00’
ACCESS INSTRUCTIONS:
1. Select TERMINAL CONFIGURATION from the MANAGEMENT
FUNCTIONS menu.
2. Select SET TERMINAL PARAMETERS.
3. Select CASSETTE SETUP.
4. Choose the CASSETTE PARAMETERS option.
5. Choose a cassette (A, B, C, or D).
6. Select the VALUE option.
D
ESCRIPTION:
The VALUE function allows the operator to set the value of a cash
or non-cash item in a particular cassette. For cash, VALUE must
be the denomination of the currency currently inside that particular
cassette and must be a whole dollar amount without cents. For
non-cash, VALUE is the face value of that particular item within the
cassette and can be any value. The default setting for VALUE is
$0.00
ERROR CONDITIONS:
An error code will occur when a non-whole dollar amount is ap-
plied to a cash cassette. Example, setting the cassette to CASH
and entering the VALUE as $5.15 will cause the terminal to indi-
cate Error# 186 Bill Size Not Configured.