User guide

TRITON SYSTEMS, INC.
SECTION 5 - MANAGEMENT FUNCTIONSOPERATION MANUAL - MODEL 97XX-Series
5-72
9700-SERIES
9705-SERIES
9710-SERIES
9750-SERIES
RESET SEQ #
FACTORY DEFAULT: N/A
ACCESS INSTRUCTIONS:
1. Select TERMINAL CONFIGURATION from the MANAGEMENT
FUNCTIONS menu.
2. Select SET TERMINAL PARAMETERS.
3. Choose the RESET SEQ # option.
DESCRIPTION:
Select the RESET SEQ. # option from the TERMINAL PARAM-
ETER menu to reset the sequence number that is printed on the
journal printout and receipt to ‘00000000’.
Resetting the SEQUENCE # is an operation that should usually be
performed at the request of your processor. Use of this function is
not required during normal operation.
E
RROR CONDITIONS:
There are no error conditions directly associated with this function.