Manual

5-117
SECTION 5 - MANAGEMENT FUNCTIONS
TRITON SYSTEMS, INC.
MULTI-CASSETTE CASH DISPENSER OPERATION MANUALMODELS 9650/9670
FUNCTION: DIAL RATE
FACTORY DEFAULT: ‘FAST’
ACCESS INSTRUCTIONS:
1.) Select TERMINAL CONFIGURATION from the
MANAGEMENT FUNCTIONS menu.
2.) Select SET TERMINAL PARAMETERS.
3.) Select TELEPHONE.
4.) Select the MODEM SETUP option.
5.) Select DIAL RATE.
DESCRIPTION:
The internal modem can be configured to send dial tones at one of three speeds. The possible
values are FAST (70 milliseconds), MED. (150 ms), and SLOW (255 ms). The default value from
the factory is FAST. After changing the dial rate, be certain to execute the RESET/TEST MODEM
function. The new dial rate does not take effect until you do this.
ERROR CONDITIONS:
There are no error conditions directly associated with this function, but if calls seem to fail, try a
slower setting.