Manual

5-88
SECTION 5 - MANAGEMENT FUNCTIONS
TRITON SYSTEMS, INC.
MULTI-CASSETTE CASH DISPENSER OPERATION MANUAL
MODELS 9650/9670
FUNCTION: VALUE
FACTORY DEFAULT: ‘$0.00’
ACCESS INSTRUCTIONS:
1.) Select TERMINAL CONFIGURATION from the
MANAGEMENT FUNCTIONS menu.
2.) Select SET TERMINAL PARAMETERS.
3.) Select CASSETTE SETUP.
4.) Choose the CASSETTE PARAMETERS option.
5.) Choose a cassette (A, B, C, or D).
6.) Select the VALUE option.
DESCRIPTION:
The VALUE function allows the operator to set the value of a cash or non-cash item in a particular
cassette. For cash, VALUE must be the denomination of the currency currently inside that particu-
lar cassette and must be a whole dollar amount without cents. For non-cash, VALUE is the face
value of that particular item within the cassette and can be any value. The default setting for
VALUE is $0.00
ERROR CONDITIONS:
An error code will occur when a non-whole dollar amount is applied to a cash cassette. Example,
setting the cassette to CASH and entering the VALUE as $5.15 will cause the terminal to indicate
Error# 186 Bill Size Not Configured.