Manual

TRITON SYSTEMS, INC.
5-17
OPERATION MANUAL - MODEL 9610 SECTION 5 - MANAGEMENT FUNCTIONS
FUNCTION: STATUS
FACTORY DEFAULT: N/A
ACCESS INSTRUCTIONS:
1.) Select DIAGNOSTICS from the MANAGEMEN FUNCTIONS
screen.
2.) Select the STATUS option.
DESCRIPTION:
The STATUS command is used to check the status of four func-
tional areas of the dispensing mechanism. These areas are the
current Status of Count Sensors, the current Double Detect sta-
tus, the current average thickness of the documents being dis-
pensed, and the current average length of the documents being
dispensed. Any of the following sets of return codes will indicate
that all of the areas are operating normally:
1.) ‘40 40/50 40 36’
2.) ‘50 40/50 40 36’
3.) ‘44 40/50 40 36’
4.) ‘54 40/50 40 36’
Note that the value of the second number in a set of return codes
may be either 40 or 50 (40/50). The cancel button must be pressed
to return to the diagnostic’s menu.
E
RROR CONDITIONS:
If any code other than what is indicated above is displayed contact
your service provider for assistance.