Manual

TRITON SYSTEMS, INC.
5-93
OPERATION MANUAL - MODEL 9610 SECTION 5 - MANAGEMENT FUNCTIONS
FUNCTION: DIAL RATE
FACTORY DEFAULT: ‘FAST’
ACCESS INSTRUCTIONS:
1.) Select TERMINAL CONFIGURATION from the
MANAGEMENT FUNCTIONS menu.
2.) Select SET TERMINAL PARAMETERS.
3.) Select TELEPHONE.
4.) Select the MODEM SETUP option.
5.) Select DIAL RATE.
D
ESCRIPTION:
The internal modem can be configured to send dial tones at one of
three speeds. The possible values are FAST (70 milliseconds),
MED. (150 ms), and SLOW (255 ms). The default value from the
factory is FAST. After changing the dial rate, be certain to execute
the RESET/TEST MODEM function. The new dial rate does not
take effect until you do this.
ERROR CONDITIONS:
There are no error conditions directly associated with this function,
but if calls seem to fail, try a slower setting.