Manual

TRITON SYSTEMS, INC.
5-59
OPERATION MANUAL - MODEL 9610 SECTION 5 - MANAGEMENT FUNCTIONS
FUNCTION: RESET SEQ #
FACTORY DEFAULT: N/A
ACCESS INSTRUCTIONS:
1.) Select TERMINAL CONFIGURATION from the
MANAGEMENT FUNCTIONS menu.
2.) Select SET TERMINAL PARAMETERS.
3.) Choose the RESET SEQ # option.
DESCRIPTION:
NOTE: This feature is not supported by all processors.
Select the RESET SEQ. # option from the TERMINAL PARAM-
ETER menu to reset the sequence number that is printed on the
journal printout and receipt to 00000000.
Resetting the SEQUENCE # is an operation that should usually be
performed at the request of your processor. Use of this function is
not required during normal operation.
E
RROR CONDITIONS:
There are no error conditions directly associated with this function.