User Manual User guide

MODEL 9100 USER MANUAL

CASSETTE CLOSE

This function is used to complete the balancing of the specified cassette(s). It prints a report summarizing

all activity on the selected cassette(s) since the last CASSETTE CLOSE and clears the totals. It also resets

the number of bills in the cassette to zero (0).

1. Enter MANAGEMENT FUNCTIONS MAIN MENU screen.

2. (The screens below represent a single note cassette) Select CLOSE > CASSETTE CLOSE > SELECT

CASSETTE > CASSETTE A: CASSETTE CLOSE.

3. After selecting Cassette A: Cassette Close, a report will be printed summarizing all activity since the

last Cassette Close. The number of bills in the cassette will be reset to zero (0).

*Note*

Single feed channel dispensers such as the TDM-1XX only display cassette A, all other cassettes will appear

grayed out. The cassette type has a default setting of cash. They are automatically placed in service after boot.

The "In-Service" configuration and status items do not apply to single feed channel dispensers.

For the dual feed channel TDM-2XX dispensers, cassettes A through C are available for configuration. Cassette

D is not supported for any of the TDM dispensers and should appear grayed out on all management functions

screens. The terminal immediately flags non-resident cassettes as out of service once the SW returns from

management functions to customer transactions for multi-feed channel mechanisms.