User Manual User guide

MANAGEMENT FUNCTIONS

ACCESS INSTRUCTIONS:

1. From the MAIN MENU screen, select CONFIGURE TER-

MINAL.

2. From the CONFIGURE TERMINAL screen, select ATM

MONITORING.

3. From the ATM MONITORING screen, select TRITON

CONNECT.

4. From the TRITON CONNECT screen, select TCP/IP

CONFIGURATION.

DESCRIPTION:

The TRITON CONNECT function allows

the terminal operator to set up parameters that control DIAL-

UP and TCP/IP communications between the ATM and

Triton Connect PC-based software to remotely manage your

Triton Systems ATMs. The following TCP/IP parameters

are accessed through this function and described on the

following pages:

! Host Numbers

! Alarm Numbers

! TCP/IP Configuration

** Important **

If using, turn Triton Connect <ON>

after entering the Configuration

parameters.

TRITON CONNECT

TCP/IP CONFIGURATION

Note: Comms Type Option

You must have the External Ethernet device

installed. For Model 8100/9100 ATMs, this function

detects the communication type installed (Dialup

or TCP/IP) and will not allow user to change

(toggle).