User Manual User guide

MODEL 9100 USER MANUAL

NETWORK SETTINGS

Description:

The NETWORK SETTINGS parameters are provided by your

host Network Administrator. The TERMINAL IP ADDRESS,

SUBNET MASK, and GATEWAY ADDRESS consist of a sequence

of four groups of numbers. Each group can be up to three

digits long and each group is separated by a period (dot

character), as in this example: 123.3.01.99

Follow these steps to initially enter or change the TERMINAL

IP ADDRESS, SUBNET MASK, and GATEWAY A DDRESS:

! Select <Change> to blank the current entry, if necessary.

! Enter the first group of numbers in the Address/Value

using the main keypad keys.

! Enter a ‘dot’ character by pressing the <Control> key,

then the <0> key Twice to select the period’, then the

<Right Arrow> key to lock it in.

! Repeat Steps 2 and 3 for the second and third group of

numbers for the Address/Value.

! Enter the fourth group of numbers for the Address/

Value.

! Select <Enter> to save the Address/Value entry or

<Cancel> to discard the changes.