User Manual User guide

MODEL 9100 USER MANUAL
SB-12
CLEAR TAMPER
This option is only displayed if the terminal has
detected a tamper condition from the VEPP de-
vice. Once the item is selected the terminal user
will get the following screen describing what ac-
tions need to be taken.
CLEAR SERIAL TAMPER
This option is only displayed when the serial num-
ber of the VEPP device does not match the VEPP
device serial number that the terminal has stored.
This is not a VEPP device tamper but an indica-
tion that the terminal may have been tampered
with. If this condition is detected the following
screen is displayed when the Terminal user se-
lects Clear Serial Tamper. When this error is
cleared, the Serial number of the connected VEPP
is written to the terminal.
KEYPAD DIAGNOSTIC MENU
This menu is dynamic. The clear error codes
(Tamper or Serial) will only appear when either
error is detected on the terminal. The VEPP Status
button will print a current status of the VEPP on
to the screen with the option to print the data in a
more detailed form.
VEPP STATUS
This screen is completed by the status informa-
tion that was received from the VEPP device. The
Print option will give a receipt that has more de-
tailed information.