User Manual User guide

SUPPLEMENT B
SB-5
NETWORK SETTINGS
This menu area allows for the terminal’s network set-
tings to be configured. These settings are defined in
Section 3, “TCP/IP Configuration” of this manual.
Consult this reference for a complete description on
TCP/IP over Ethernet configuration.
TRITON CONNECT HOST SETUP
Triton Connect must be configured for use with the
new TCP/IP over Ethernet interface as well. Setup
begins from the menu path: TERMINAL CONFIGURA-
TION > SET TERMINAL PARAMETERS > MORE > TRITON
CONNECT. The following screens are displayed from
the “SET TERMINAL PARAMETERS > MORE” screen.
From here select TRITON CONNECT.
The “Ethernet” button is a status button that indi-
cating the terminal is equipped with the external
Ethernet module. This nullifies the dial-up option
(should be grayed). From this screen, the “TCP/IP
Configuration” option should be selected to enter
the configure options for TCP/IP over Ethernet as-
sociated with Triton Connect, as detailed in Section
3, “TCP/IP Configuration” of this manual.