Model 9100 QUICK REFERENCE GUIDE Model 9100 (deep cabinet) Model 9100 (shallow cabinet) THIS AREA FOR SERVICE PROVIDER CONTACT INFORMATION: TDN 07100-00079 04/2007
MANAGEMENT FUNCTIONS - ACCESS INSTRUCTIONS 1. AT ATM WELCOME SCREEN, PRESS AND HOLD DOWN KEY (LOWER RIGHT CORNER OF KEYPAD), PRESS <1> KEY, THEN RELEASE BOTH KEYS. THE TOP MENU WILL BE DISPLAYED. 2. AT THE TOP MENU, SELECT MANAGEMENT FUNCTIONS OPTION. ENTER PASSWORD TO ACCESS MANAGEMENT FUNCTIONS MAIN MENU. THE MENU SCREEN (RIGHT) WILL BE DISPLAYED (ADMINISTRATION PASSWORD ACCESS DISPLAYED).
CLOSE ACCESS MANAGEMENT FUNCTIONS USING ACCESS INSTRUCTIONS. SELECT CLOSE FUNCTIONS. DAY CLOSE: USED TO COMPLETE DAILY BALANCING OF THE ATM WITH THE PRINTED INFORMATION INCLUDES A TOTAL OF ALL TRANSACTIONS SINCE THE LAST DAY CLOSE. TOTALS ARE CLEARED AND SWITCHED TO THE NEXT BUSINESS DAY. THE HOST PROCESSOR. TRIAL CLOSE: THIS OPTION FUNCTIONS LIKE A DAY CLOSE EXCEPT THE TOTALS ARE NOT CLEARED. JOURNAL - PRINT LAST X ACCESS MANAGEMENT FUNCTIONS USING ACCESS INSTRUCTIONS. SELECT SELECT PRINT LAST X.
CASSETTE CLOSE 1 3 2 6 5 4 REPLENISH CASSETTE PROCEDURES 7 CASSETTE CLOSE DESCRIPTION S TE P 1 DESCRIPTION Access Management Functions using Access instructions. Select "CLOSE" option. 2 Select "CASSETTE CLOSE" option. 3 Select either Cassette "A" (single cassette dispenser) or "A"/"B" (multi-cassette dispenser). 4 Under Cassette: A/B options, select "CASSETTE CLOSE".
REPLENISH TDM CASSETTE(S) STEP ACTION STEP 1 UNLOCK/OPEN SECURITY DOOR. EXTEND THE DISPENSER MOUNTING TRAY. NOTE: TDM-100 HAS A FIXED TRAY ASSEMBLY. 5 ACTION COUNT THE NUMBER OF BILLS THAT REMAIN IN THE CASSETTE, IF ANY. COUNT THE NUMBER OF BILLS THAT ARE BEING ADDED TO THE REMAINING NOTES . THE TOTAL NUMBER OF NOTES WILL BE THE NUMBER ENTERED IN THE “ENTER QTY. IN CAS- SETTE” PROMPT. 2 6 LOCATE THE SPRING-LOADED LOCKING PIN ON THE UNDERSIDE OF THE TRAY.
REPLENISH SDD CASSETTE STEP 1 ACTION UNLOCK/OPEN SECURITY DOOR . G RASP HANDLE STEP ACTION 5 COUNT THE NUMBER OF BILLS THAT REMAIN IN THE CASSETTE, IF ANY . ON CASSETTE WHILE COUNT THE NUMBER OF BILLS THAT ARE BEING HOLDING MECHANISM . ADDED TO THE REMAINING NOTES . REMOVE CASSETTE. PLACE FACE. 2 THE TOTAL NUMBER OF NOTES WILL BE THE NUMBER ENTERED IN THE “ENTER QTY. IN CASSETTE” PROMPT. ON A FLAT SUR - USE CASSETTE KEY “PRIME” CASSETTE. 6 TO Green window LOAD CURRENCY.
REPLENISH MINIMECH CASSETTE ACTION STEP 1 4 U NLOCK / OPEN SECU RITY DOOR . G RASP TRAY HANDLE AND RE - REMOVE ANY REJECTED NOTES FROM THE RE JECT COMPARTMENT. 5 LOAD CURRENCY. SLOWLY PUSH PACKER PLATE TOWARDS CUR RENCY. 6 GRASP DO NOT RECYCLE REJECT NOTES ! THE PUSHER PLATE TO THE REAR OF THE TRAY THE NUMBER OF BILLS THAT ARE BE - THE TOTAL NUMBER OF NOTES WILL BE THE NUMBER ENTERED IN THE “ENTER QTY. IN CASSETTE” PROMPT. PLACE ON A FLAT SURFACE.
REPLACING RECEIPT PRINTER PAPER STEP ACTION STEP 1 CUT REMAINING PAPER 2 TO ALLOW REMOVAL 4 R EMOVE SPINDLE FROM 5 FEED PAPER END INTO PRINTER FEED SLOT PRESS FEED BUTTON TO 8 STEP 3 ACTION L IFT SPINDLE TO RE - CLEAR PAPER FROM FEED MOVE PAPER ROLL AND PATH SPINDLE PLACE SPINDLE IN NEW PAPER ROLL DEPLETED PAPER ROLL 7 ACTION PAPER WILL FEED AUTOMATICALLY 8 6 PLACE NEW PAPER ROLL ON BRACKET .
