Installation Manual Instruction Manual

B-7
APPENDIX B - ATM INSTALLATION FOR A CCESSIBILITY
SNOITACIFICEPSYTILIBISSECCA
HTPEDHCAERTHGIEHMUMIXAM
sehcnI sretemilliM sehcnI sretemilliM
01552450731
110822/1350631
21503355431
310332/1255331
415532/1150131
51083155921
615042/1055821
71034050721
815542/1945521
9158
4945421
020152/1840321
125352/1745021
22065745911
325852/1640811
42016640711
(3) Forward and Parallel Approach. If both a forward and parallel approach are possible, operable parts
of controls shall be placed within at least one of the reach ranges in paragraphs (1) or (2) of this section.
(4) Bins. Where bins are provided for envelopes, waste paper, or other purposes, at least one of each
type provided shall comply with the applicable reach ranges in paragraph (1), (2), or (3) of this section.
EXCEPTION: Where a function can be performed in a substantially equivalent manner by using an
alternate control, only one of the controls needed to perform that function is required to comply with this
section. If the controls are identified by tactile markings, such markings shall be provided on both controls.
4.34.4 Controls. Controls for user activation shall comply with 4.27.4 (Operation).
4.34.5 Equipment for Persons with Vision Impairments. Instructions and all information for use shall
be made accessible to and independently usable by persons with vision impairments.
(20) Where automated teller machines (ATMs) are provided, each ATM shall comply with the require-
ments of 4.34 (Automated Teller Machines) except where two or more are provided at a location, then only
one must comply.
EXCEPTION: Drive-up-only automated teller machines are not required to comply with 4.27 (Controls
and Operating Mechanisms) and 4.34.3 (Reach Ranges).