Installation Manual Instruction Manual

MODEL 9100 INSTALLATION MANUAL

1. Route the AC power cord and the phone (or Cat-5) cable through either the main or alternate cable

access hole (as applicable).

2. Connect the AC power cord and communication cable to their respective facility outlets.

3. Secure/plug the access holes with the grommet or plug provided.

Main cable

access hole

Power Outlet Accessibility

Whether you are installing a new AC socket outlet or plan to use an existing

outlet to supply power to the ATM, make sure the following requirements are

met:

1. The outlet is located near the equipment.

2. AC power for the terminal should come from a dedicated source with an

isolated ground. The ATM is designed to work on an IT (Isolated-Terra)

type power system having a phase-to-phase voltage not exceeding 240

volts.

3. The outlet is easily accessible and will not be blocked once the equip-

ment is installed.

ROUTE / CONNECT AC POWER AND COMMUNICATION LINE